Online Store

36433BS-Overhead Door Code Dodger Remote

Multi-button transmitter that can be used to control up to three different garage door openers.

This remote is compatible with all Overhead Door Codedodger I and II as well as Genie Intellicode I and II garage door openers manufactured since 1995

37219R Overhead Door Mini Remote

Three button mini CodeDodger® remote control (Generation II). Features an automatic seek technology that responds to either a 315mhz or 390mhz frequency to reduce any potential external radio interference. This remote has CodeDodger 2® (2010-Current) access security system that is also compatible with CodeDodger 1® (1995-Select Current) technology. This remote control will operate up to three different garage door openers and provides a low battery warning when the battery needs to be replaced.

37345R-Overhead Door Master Remote

This 3 button remote control is compatible with all Overhead Door and Genie garage door opener products from 1993 to the present.

109130-3601 Single Button Overhead Door 360mhz 3-Position Dipswitch Remote

Single button remote control. This remote is compatible with all Overhead Door garage door openers that use a 360mhz receiver with 3-position dipswitches that control the code setting.

109130-3801 Single Button Overhead Door 380mhz 3-Position Dipswitch Remote

Single button remote control. This remote is compatible with all Overhead Door garage door openers that use a 380mhz receiver with 3-position dipswitches that control the code setting.

109130-3901 Single Button Overhead Door 390mhz 3-Position Dipswitch Remote

Single button remote control. This remote is compatible with all Overhead Door garage door openers that use a 390mhz receiver with 3-position dipswitches that control the code setting. This is also compatible with the Horton external receiver that is used in some residential applications.

Operator Drawbar Plate Part# 406947-6 (19”) 406947-3 (21”) 406947-2 (24”)

Garage door reinforcement plate. Used when attaching a garage door operator to the door. This provide a sturdy place for the operator door bracket to mount to. Available in three different sizes (19”, 21”, 24”) depending on how tall the top section of your garage door is.

1/8” Torsion Spring Cable (Available For 7’ Tall or 8’ Tall Doors)

These cables are for Residential Use Only. 1/8” Heavy Duty cables for use on a torsion spring set up. These cables are used mainly on wood doors and heavier carriage house style steel doors.

Cable Size: 1/8″ 7×19.     Length 101″ (7’ Tall) 112” (8’ Tall)

3/32” Torsion Spring Cable ( Available for both 7’ tall and 8’tall garage doors)

These cables are for Residential Use Only. 3/32” Cables for a standard torsion spring set up. These cables are used on both insulated and non-insulated residential steel garage doors.

Cable Size: 1/8″ 7×19     Length 101″ (7’ Tall) 112” (8’ Tall)

37221R Codedodger Photo Cells

Complete photocell kit (Safe-T-Beam®) including both the receiver (Red) and transmitter (Green) photocells with mounting brackets factory attached.

Keypad Model 37225R

Code Dodger wireless keyless entry, Series II (keypad) with a White flip up cover. Compatible with all Overhead Door Code Dodger and all Genie Intellicode garage door openers built since 1995. This keyless entry features a lighted keypad and will allow you to control up to three different garage doors from one keypad. Programming instructions are included.